Total Recall
Control
Description/Use
Delete
Delete an image or clip (Traditional as well as Total Recall Data)
TRI
Load/Delete/Exit
• If Total Recall Data is automatically loaded, turn the dial to toggle between Exit
TRI and Delete TRI, then press the dial to select the action.
• If Total Recall Data is not automatically loaded, turn the dial and then press the
dial to Load TRI or Delete TRI
Note: Deleting or Exiting TRI will ONLY affect the TRI Data. Traditional image and
clip information will be preserved.
Note 2: Navigating away from an image or clip with TRI loaded will also ‘Exit TRI’ if the
next image or clip does not have TRI data available.
Cine Select Push to toggle between Chapter or Frame
• When Chapter is selected, turn dial to advance or go back chapter at a time
• When Frame is selected, turn dial to advance or go back frame by frame within a
chapter
Play/Pause Toggle between Play and Pause
• When clip is paused, turn dial to advance or go back frame by frame
• When clip is playing, turn dial to increase or decrease the speed of playback
Once an image or clip has been selected and TRI data becomes available, users have access
to image optimization controls.
The following manipulations are available when an image/clip with TRI data is loaded. The
Priority key can be used to gain access to modes that are ‘on’ but may not have Priority:
• Stripping modes if multiple modes are active and ability to manipulate image settings of
each mode (ex. If Color and PW Doppler are ‘on’ users can press D or C Knob to turn
off modes).
• Image optimization of 2D, Color, M-Mode, and Spectral Doppler such as baseline,
sweep speed, map, TGC/Gain, DR, scale when in CW Doppler, display format, etc.
• Trimming clips and resaving
• Editing annotations
• Editing calculations including the addition of auto trace and volume flow.
Note: Archived Total Recall Data may not be compatible between system software releases
Image Management Options
Exams and associated images and clips, can be managed in a number of ways.
From the Archive page, upon selecting an exam, a drop down menu will list options including but not
limited to:
•
Review Images: Selecting this option loads the images for review
•
Patient Info: System is directed back to the Patient Data page
To Next Page
Loading...
