EasyManuals Logo

Minelab GPX 5000 User Manual

Minelab GPX 5000
100 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
26 Turning the Detector On
It is best to only turn the detector on
when outdoors and away from sources of
electrical interference such as power lines,
transmitters, electric fences and phone
towers. These sources may cause the
detector to perform erratically, eliciting
numerous false signals.
Note: If the detector emits an overload sound
move the coil away from any large metal
objects. Overloading is not harmful to the
electronics of the detector.
The On/Off switch is located on the Rear Control Panel.
To turn the Detector On or Off:
1 Press the On/Off switch down and release.
2 A welcome screen will appear with the GPX Series model
number of your detector.
Avoid turning the detector On and Off repeatedly.
If this happens the Coil Overcurrent screen will appear. Turn
the detector Off and wait for a short time before turning the
detector On again.

Table of Contents

Other manuals for Minelab GPX 5000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Minelab GPX 5000 and is the answer not in the manual?

Minelab GPX 5000 Specifications

General IconGeneral
TechnologyMPS, DVT & SETA
Ground BalanceAutomatic and Manual
DiscriminationIron Reject
DisplayLCD
Battery LifeUp to 12 hours
Coil11" Double-D coil
Audio OutputBuilt-in speaker, headphone jack
BatteryLithium-ion rechargeable battery
Length1100 mm - 1300 mm (43.3" - 51.2")
WaterproofCoil is waterproof; control box is not
Target IdentificationAudio only
Weight2.4 kg (5.3 lbs) including battery
Headphone Jack6.35 mm (1/4")

Related product manuals