Minelab GPX 5000 User Manual

61
Editing Personal Search Modes
You can create your own personal Search Modes for different
locations, targets, coil sizes, etc. All functions displayed under
the Search Mode name in the LCD menu are Search Mode
specific functions. This allows you to have different settings for
each one of your Custom Search Modes.
Choose the Search Mode you wish to edit and select new
settings for any functions you wish changed. All changes are
automatically saved when the detector is switched off.
You can assign one of the 14 different names, from the Custom
Name list (p. 76), to each of the four Custom Search Modes.
Tip: If you wish to quickly
compare settings you
can change the search
mode switch on the front
panel between Deep,
General and your Custom
selection, while looking at
the functions displayed on
the LCD.

Minelab GPX 5000 Specifications

General

Technology	MPS, DVT & SETA
Ground Balance	Automatic and Manual
Discrimination	Iron Reject
Display	LCD
Battery Life	Up to 12 hours
Coil	11" Double-D coil
Audio Output	Built-in speaker, headphone jack
Battery	Lithium-ion rechargeable battery
Length	1100 mm - 1300 mm (43.3" - 51.2")
Waterproof	Coil is waterproof; control box is not
Target Identification	Audio only
Weight	2.4 kg (5.3 lbs) including battery
Headphone Jack	6.35 mm (1/4")