2. Overview
The printing process of the MD series 3D printer is as follows: the slicing software CURA convert the .stl
document into a .gcode document, and 3D printer read the .gcode document and print the raw material into a 3D
product.
Cura is a slicing software that runs on Windows XP, Windows Vista, Windows 7, Windows 8, or Windows 10.
The product size and print size of MD series 3D printer are as follows. Each filament holder can hold at least
1kg of printed filament, 1 kg filament can continue to print for about 120 hours, you can also add a second roll of
filament for continuous printing.
MD Series Industrial 3D Printers have Resume Printing Function and Filament sensor, which can greatly
save the client's losses.
Resume Printing Function: During the printing process, if the power is off, the machine will save the data.
After powering on, follow the on-screen prompts to continue unfinished print jobs.
Filament sensor: If the filament is not detected when printing, the machine will automatically pause
printing, install new filament, and click the Continue button on the screen to continue printing.
Below we will take MD-600 Pro as an example to introduce the function and use of the printer:
4
To Next Page
Loading...
