5. Software
MD series 3D printers work with a variety of slicing software, such as Cura, Simplify 3D, Repetier-Host
and so on. Now we will introduce CURA_x.xx.xx in detail, you can learn how to set the printing parameters,
which will help you to become more familiar with the slicing software and print the first sample successfully.
First, you can find the CURA_x.xx.xx from the SD card, and install it on your computer.
Install CURA
1. Double click Cura_x.xx.xx.exe to install
2. Install the software by default as follows.
Click Add printer
11
To Next Page
Loading...
