Minolta A2 User Manual

28 (2720)A
REPAIR GUIDE
Fig. 1 Installation of the zoom cam barrelFig. 1 Installation of the zoom cam barrel
Fig. 1 Installation of the zoom cam barrelFig. 1 Installation of the zoom cam barrel
Fig. 1 Installation of the zoom cam barrel
Insert the zoom cam barrel at the point where the 2nd lens group guide pin on the cutout part on theInsert the zoom cam barrel at the point where the 2nd lens group guide pin on the cutout part on the
Insert the zoom cam barrel at the point where the 2nd lens group guide pin on the cutout part on theInsert the zoom cam barrel at the point where the 2nd lens group guide pin on the cutout part on the
Insert the zoom cam barrel at the point where the 2nd lens group guide pin on the cutout part on the
figure of fix barrel and the lead in the figure of near the gear of the zoom cam barrel are aligned.figure of fix barrel and the lead in the figure of near the gear of the zoom cam barrel are aligned.
figure of fix barrel and the lead in the figure of near the gear of the zoom cam barrel are aligned.figure of fix barrel and the lead in the figure of near the gear of the zoom cam barrel are aligned.
figure of fix barrel and the lead in the figure of near the gear of the zoom cam barrel are aligned.
CutoutCutout
CutoutCutout
Cutout
2nd lens group guide pin2nd lens group guide pin
2nd lens group guide pin2nd lens group guide pin
2nd lens group guide pin
Fix barrelFix barrel
Fix barrelFix barrel
Fix barrel
LeadLead
LeadLead
Lead
Gear partGear part
Gear partGear part
Gear part
Fig.2 Installation of the 3rd and the 4th moving barrel assyFig.2 Installation of the 3rd and the 4th moving barrel assy
Fig.2 Installation of the 3rd and the 4th moving barrel assyFig.2 Installation of the 3rd and the 4th moving barrel assy
Fig.2 Installation of the 3rd and the 4th moving barrel assy
1. Set the zoom cam barrel to the "Telephoto" end (reverse direction of the arrow), and insert the 3rd and1. Set the zoom cam barrel to the "Telephoto" end (reverse direction of the arrow), and insert the 3rd and
1. Set the zoom cam barrel to the "Telephoto" end (reverse direction of the arrow), and insert the 3rd and1. Set the zoom cam barrel to the "Telephoto" end (reverse direction of the arrow), and insert the 3rd and
1. Set the zoom cam barrel to the "Telephoto" end (reverse direction of the arrow), and insert the 3rd and
the 4th moving barrel assy.the 4th moving barrel assy.
the 4th moving barrel assy.the 4th moving barrel assy.
the 4th moving barrel assy.
2. Turn the 4th moving barrel assy back to about 2 - 3mm (reverse direction of the arrow), and turn the2. Turn the 4th moving barrel assy back to about 2 - 3mm (reverse direction of the arrow), and turn the
2. Turn the 4th moving barrel assy back to about 2 - 3mm (reverse direction of the arrow), and turn the2. Turn the 4th moving barrel assy back to about 2 - 3mm (reverse direction of the arrow), and turn the
2. Turn the 4th moving barrel assy back to about 2 - 3mm (reverse direction of the arrow), and turn the
zoom cam barrel in the direction of "Wide" (direction of the arrow) in the condition that the 2nd lenszoom cam barrel in the direction of "Wide" (direction of the arrow) in the condition that the 2nd lens
zoom cam barrel in the direction of "Wide" (direction of the arrow) in the condition that the 2nd lenszoom cam barrel in the direction of "Wide" (direction of the arrow) in the condition that the 2nd lens
zoom cam barrel in the direction of "Wide" (direction of the arrow) in the condition that the 2nd lens
group assy, the 3rd land the 4th moving barrel assy are turned down into the arrowed direction.group assy, the 3rd land the 4th moving barrel assy are turned down into the arrowed direction.
group assy, the 3rd land the 4th moving barrel assy are turned down into the arrowed direction.group assy, the 3rd land the 4th moving barrel assy are turned down into the arrowed direction.
group assy, the 3rd land the 4th moving barrel assy are turned down into the arrowed direction.
4th moving barrel assy4th moving barrel assy
4th moving barrel assy4th moving barrel assy
4th moving barrel assy
Zoom cam barrelZoom cam barrel
Zoom cam barrelZoom cam barrel
Zoom cam barrel
WideWide
WideWide
Wide

Minolta A2 Specifications

General

Sensor Type	CCD
Optical Zoom	7x
Display Size	1.8 inches
ISO Sensitivity	64 - 800
Image Stabilization	No
Max Resolution	3264 x 2448
Image Ratio w:h	4:3
Sensor Size	2/3" (8.8 x 6.6 mm)
Maximum Aperture	F2.8 - F3.5
Storage Types	CompactFlash (Type I or II), Microdrive
Viewfinder	Electronic
Resolution	8 megapixels
Lens Focal Length	28 - 200 mm
Battery	NP-400 Lithium-Ion rechargeable battery
Shutter Speed	30 - 1/4000 sec