Minolta Di152 - Setting in the Security Mode

FrameMaker Ver5.5E(PC) Di152/Di183 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.07.26
S-26
4-3. Setting in the Security Mode
<Count-up Table>
1: 1 count 2: 2counts
Code No.
Setting (The default is ).
--1
<Total Counter Count Mode>
Select the condition by which the Counter count is increased.
--2
<Size Counter Count Mode>
Select the size of the paper to be counted by the Size Counter.
--3
<Key Counter>
Set to “1” if a Key Counter is plugged in.
NOTE
• If “0” is set, copies can be made without having to plug the Key
Counter into the socket.
--4
<Total Counter>
Set to “1“ if a Total Counter is plugged in.
Size Counter Count Mode Size other than those set Set size
Total Counter Count Mode 0 1 2 0 1 2
Total Counter 1 1 2 2
Size Counter Not Count 1 1 2
Highlighted
Setting Description
1 Copy per 1 copy cycle.
1
Multiple count-up according to the paper size and
copying mode.
2
0
Setting Description
0 Not Count
A3/Ledger
2 A3/B4/Legal/Ledger
3 A3/B4/Legal/Ledger/11×14/FLS
1
Setting Description
Plug-In Counter not plugged in
1 Plug-In Counter plugged in
0
Setting Description
Mechanical Total Counter not installed
1 Mechanical Total Counter installed
0