FrameMaker Ver.5.5E(PC) DIS/REASSEMBLY, ADJUSTMENT FOR Di152/Di183
01.09.03
D-4
1-3. LASER SAFETY LABEL
• A laser safety labels is attached to the outside of the machine as shown below.
1-4. LASER CAUTION LABEL
• A laser caution label is attached to the inside of the machine as shown below.
1-5. PRECAUTIONS FOR HANDLING THE LASER EQUIPMENT
• When laser protective goggles are to be used, select ones with a lens conforming to the
above specifications.
• When a disassembly job needs to be performed in the laser beam path, such as when
working around the printerhead and PC Drum, be sure first to turn the copier OFF.
• If the job requires that the copier be left ON, take off your watch and ring and wear laser
protective goggles.
• A highly reflective tool can be dangerous if it is brought into the laser beam path. Use
utmost care when handling tools on the user’s premises.
4002O312CA
1155O764AA
For Europe
For United States
4022D038CA
Laser safety label
CLASS 1 LASER PRODUCT
LASER KLASSE 1
PRODUCT
4022D501AA
4022D027AA
To Next Page
Loading...
