FrameMaker Ver.5.5E(PC) DIS/REASSEMBLY, ADJUSTMENT FOR Di152/Di183
01.09.03
D-49
3-12. SHIFTING UNIT (OT-103): OPTION
(1) Removal of the Main Board
1. Remove the control panel, Front Cover, Rear Cover, Right Cover, and Right Inside
Cover.
2. Remove two screws and the fan cover.
3. Remove one screw and the Mechanical Counter
(if the copier is so equipped).
4. Remove one screw and the Motor Assy.
5. Unplug two connectors and remove the harness
from the guide.
6. Unplug one connector from the Main Board.
7. Remove the harness from one edge cover.
To Next Page
Loading...
