FrameMaker Ver5.5E(PC) Di152/Di183 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.07.26
S-3
No. Name Description
24 Clear key Press to reset the number of copies to “1”.
25 Stop key • Press to stop a print cycle.
• Press to stop a scanning sequence.
26 Start key • Press to start a scanning sequence.
• Press to start a print cycle.
• Press to validate the setting just made.
• The key lights up green when the copier is ready to make
copies, orange when it is not ready to make copies.
27 Enter key Press to validate the setting just made.
28 Zoom key Press to select a zoom ratio from among those fixed ratio
available as standard.
29 Auto Paper/Auto Size
key
Press to select either Auto Paper or Auto Size.
30 Paper key Press to select the paper size.
31 Auto/Photo key Press to adjust the image density of the copy.
To Next Page
Loading...
