Minolta Di152 - Page 94

FrameMaker Ver5.5E(PC) Di152/Di183 SWITCHES ON PWBs/TECH. REP. SETTINGS
01.07.26
S-6
Code No.
Setting (The default is ).
C-4
<Density Priority>
Select the priority exposure mode selected when the Power Switch is
turned ON or Panel Reset key pressed.
C-5
<Density Level (Auto)>
Select the priority exposure level in the Auto Exposure mode.
C-6
<Density Level (Manual)>
Select the priority exposure level in the Manual Exposure mode.
C-7
<Output Priority>
Select the priority finishing type.
C-8
<Crisscross Mode>
Select whether to enable or disable crisscross sorting automatically
C-9
<4in1 Copy Order>
Specify the default copying order in the 4in1 mode.
C10
<Book Binding Position>
Select whether to the copier scan the left-hand-side page (Left-
bound) or the right-hand-side page (Right-bound) first when it scans
an open book.
Highlighted
Setting 1 2
Description Auto Manual Photo Manual
0
Setting 0 2
Description Lighter Normal Darker
1
Setting 1 2 4 5
Description
Step 1 Step 2 Step 3 Step 4 Step 5
Lighter Darker
3
Setting 1 2
Description Non-Sort Sort Group
0
Setting 1
Description Enabled Disabled
0
Setting 1
Description
0
12
34
13
24
Setting 1
Description Left-bound Right-bound
0