The index thumbnails can be saved as an index file. The index file can be loaded into the scanner
so that the index scan does not need to be made again. The index image file format is unique to
this software. An index scan of all the frames in the film holder, including empty frames, must be
made before the index thumbnails can be saved.
Click the save index-file button. The standard save-as dialog box will appear.
Enter the file name and select the file destination. Click the
save button. The film holder does not have to be in the scan-
ner to save the file.
An index file can be displayed in the index window of the util-
ity software.
Click the load index-file button. The open dialog box will
appear.
Select the index file to be loaded. Click the open button. The
current index display will be replaced with the images in the
new file.
The displayed thumbnail images can be saved in one image file. An index scan of all the frames
in the film holder, including empty frames, must be made before the index thumbnails can be
saved.
Click the save index-image but-
ton. The standard save-as dia-
log box will appear.
Enter the file name, and select the file destination and file
format for the image data. Click the save button. File formats
that can be selected with Windows operating systems are
Bitmap (BTM) or JPEG, and with Macintosh are Pict or
JPEG. The film holder does not have to be in the scanner to
save the images.
Saving the index images
Saving an index file
Loading an index file
49
To Next Page
Loading...
Need help?
General
