Use the left and right keys (1) to adjust the
exposure-compensation value.
• The LCD monitor will display the exposure-
compensation icon and value.
• Change in exposure compensation is visible
in the live image on the monitor.
The adjustment in exposure will be
automatically set after five seconds or when
another camera button is pressed.
46
RECORDING MODE
Exposure compensation
The camera exposure can be adjusted to make the final picture lighter or darker by as
much as ±2Ev in 1/3 increments. The exposure-compensation value will remain in effect
until it has been reset or the camera has been turned off.
The exposure compensation must be set before the image is captured. When setting the exposure
compensation, the amount of compensation is shown next to the exposure-compensation icon on the
monitor. When set to any value other than 0.0, the icon will remain on the LCD monitor as a warning.
To set the exposure compensation, the monitor must be on.
1
To Next Page
Loading...
Need help?
General
