Miscellaneous
8
EP1085 8-1
8 Miscellaneous
8.1 Care of the Copier
To keep your copier in good shape at all times, make the following daily
checks and cleaning.
Daily Checks
Power Cord, Communications Cable, Ground Cable
Communications Cable: Cable connecting the copier with options
Original Glass
Original Cover, Automatic Document Feeder
Item Action
Is the copier placed on its power cord or
other Cables?
It could result in the copier or other electrical
equipment malfunctioning. Move the copier
immediately.
Is the copier placed on cables of other
electrical equipment?
Are the cord and cables free of damage or
cracks?
Turnthe copier OFFimmediately, unplug the
power cord, and call your Technical
Representative.
Has the cord or cable jacket frayed to expose
the wires?
Item Action
Is the Glass dirty? Clean the Glass using theproceduregiven in
“Cleaning”, see page 8-3.
Is the Glass scratched? Call your Technical Representative.
Is the Glass cracked or chipped?
Item Action
Is the Original Pad or Document Transport
Belt dirty?
Clean the Pad or Belt using the procedure
givenin“Cleaning”,seepage8-2.
Is the Original Pad or Document Transport
Belt scratched?
Call your Technical Representative.
To Next Page
Loading...
