4
Auxiliary Functions
4-6 EP1085
4.4 User’s Choice
The copier has been set so that the
most frequently used settings are
automatically selected in the initial
mode. The User’s Choice allows you to
select the default settings which are
automatically selected in the initial
mode according to your own needs.
By setting defaults for the paper size,
zoom ratio and other settings that are most frequently used, time and
effort to make extra settings will be eliminated when the copier is turned
ON or when the auto reset function is activated.
For more details, consult your Technical Representative.
Functions Available in User’s Choice
Description of Each User’s Choice Function
U-4 Lightweight Original Mode
Selecteither one of the following settings when the copier is equipped with
the Automatic Document Feeder.
If “0” is selected:
You can make copies only from originals of standard weight (Normal
Mode).
If “1” is selected:
You can make copies from lightweight originals (40g/m
2
to 50g/m
2
), as
well as originals of the standard weight (Lightweight Original Mode).
Choice
Code
Function
Choice
Code
Function
U-4 Lightweight Original Mode U-20 Auto Panel Reset ON/OFF
U-7 Non-Auto Shut OFF U-21 Energy Saver ON Timing
U-12 Auto Size/Manual priority U-23 Auto Panel Reset for Plug-In
Counter
U-13 Default auto exposure level U-24 Sort/Non-Sort Auto Switching
ON/OFF
U-14 Default exposure mode/level U-28 Auto Shut OFF Timing
U-15 Default Finishing mode
Setting Description Initial Setting
0 Lightweight Original Mode OFF
1 Lightweight Original Mode ON
%
50%~200%
1142O145DB
141%
A4
A3
115% B4
A3
100% Full Size
81% B4 A4
70% A3 A4
To Next Page
Loading...
