Minolta EP1085 - Closure Failure Indicator

5
When an Indicator Lights Up
5-6 EP1085
Closure Failure Indicator
The Closure Failure Indicator lights up if
a copier door is left open, or an option is
not attached properly. The Monitor
Display shows the location of the
closure failure. At this time, you can no
longer start a new copy cycle. Correct
the closure failure by following the
procedure given below.
Check that the Right Door or Front Door is closed.
Check that the Sorter is in position
Check that the Automatic Document Feeder is lowered.
Check that the Document Turnover/Exit Unit Guide Plate is in position.
1142O018AA
Monitor Display Check Location
1142O063AA
1142O063AA
Monitor Display Check Location
1142O063AA
Monitor Display Check Location