Minolta EP1085 - Toner Replenisher Function (Increasing the Image Density)4-3

Auxiliary Functions
4
EP1085 4-3
4.2 Toner Replenisher Function
(Increasing the Image Density)
The copier tends to exhaust the supply
of toner rapidly when making a number
of copiesfroman originalwith darksolid
areas. As a result, the image density of
the copy will become lighter. In such a
case, you can use the Toner
Replenisher function to regain the
normal image density quickly.
Even if you continue making copies after the image density has become
lighter, the copier will gradually recover the normal image density. The
Toner Replenisher Mode can, however, be used to obtain the normal
image density more quickly.
è Press the Auxiliary Toner
Replenishing Key.
This causes the copier to initiate
toner replenishing, which lasts for
90 seconds at maximum.
NOTES
è Do not turn the Power Switch OFF or open the Front or Right Door
while the copier is replenishing toner.
è Toner is not replenished if the image density is sufficiently high.
Meter Count
Toner
Drum Dehumidify
1142O152CA
Original Copy Copy Made After
Toner Replenisher
Meter Count
Toner
Drum Dehumidify
1142O118CA