When an Indicator Lights Up
5
EP1085 5-5
4 Slide the Edge Guides tightly up
against the paper. Gently slide the
Drawer back in.
NOTE
è When loading Inch Size paper into
the Drawer, flip the Marketing Area
Switch located in the rear left corner
oftheDrawerto“Inch”.
Adding Paper (Multi Bypass Tray)
The indications on the left show that the
Multi Bypass Tray has run out of paper.
1 Load the paper stack onto the Tray
so that its front side faces up and
insert it until it stops.
NOTES
è The paper should be loaded no higher than Ä (Max. Level Indicator).
è Before inserting, fan the paper stack well if you are using
transparencies or translucent paper.
è Correct any curl if you are using thick paper.
1142O061AA
Monitor Display
Add Paper Indicator
To Next Page
Loading...
