Making Copies
3
EP1085 3-9
Single Automatic Document Feeding Mode (SADF Mode)
This is the mode in which you insert your originals one by one into the
Automatic Document Feeder to make a copy or copies from it. When you
insert the original, the copier automatically starts the copy cycle.
Originals available for the SADF Mode:
Type: Plain paper
Thickness: 35g/m
2
to 157g/m
2
Size: A3toA5
1 Open the Document Feed Tray and
slide the Guide Plate to the size of
the orginal.
2 Make sure that the Start Key islit
green and insert the originalface
down into the Document Feed Tray.
NOTES
è Be sure to place one original at a time.
è Be sure to correct any fold or curl in the original.
3 The original is automatically taken up and the copy cycleis started.
4 Making sure that the Start Key lights up green again, insert the next
original.
To Next Page
Loading...
