Minolta EP1085 - For Originals Not Suitable for Reliable Operation of the Automatic Document Feeder

3
Making Copies
3-8 EP1085
For Originals Not Suitable for Reliable Operation of the Automatic
Document Feeder
1 Raise the Automatic Document
Feeder and place the original face
down on the Original Glass. Align
the rear left corner of the original
with the marker on the Original
Width Scale. Then press the rear
edge of the original up against the
Original Positioning Plate.
2 Gently lower the Automatic
Document Feeder and start the copy cycle.
Original Positioning Plate
Original Width Scale