3
Making Copies
3-24 EP1085
3 Load a neat stack of copy paper on
the Tray and insert it into the copier
until it stops.
NOTES
è The paper should be loaded no higher than the Ä (Max. Level
Indicator).
è Before inserting, fan the paper stack well if you are using OHP
transparencies or translucent paper.
è Correct any curl if you are using thick paper.
è The paper will be copied on the side facing up.
4 Using the Key Pad, enter the number of copies to be made.
5 Press the Start Key to start the copy
cycle.
NOTES
è Do not insert the paper while the copier is in the warm-up cycle or a
multi-copy cycle.
è The Auto Size and Book Copying Mode cannot be selected for manual
bypass copying.
1139O2360A
To Next Page
Loading...
