5
When an Indicator Lights Up
5-22 EP1085
NOTE
è Make sure that “MT starter 104” is printed on the Starter Bottle.
3 Peel off the tape from the Starter
Bottle.
4 Align the markings on the Starter
Bottle with the upper side of the
Bottle Holder and slide the Bottle
into position.
NOTE
è Insert the Bottle all the way into the copier until the marking on the
Bottle is aligned with the marking on the Bottle Holder.
5 Then, swing in the Bottle Holder
until it locks into position. Close the
Front Door.
6 Plug the Power Cord into the wall
outlet and turn ON the Power
Switch. This will cause the wait
indicator to be shown on the control
panel.
To Next Page
Loading...
