Minolta EP5000 - Page 234

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-10
1156SBS040402A
[2/6]
Touch Panel
Display
Setting (The default is .)
Highlighted
Expo. Mode Priority Specify the default exposure mode selected automatically when power is turned
ON or the Panel Reset key pressed.
Manual
Auto
Expo. Level Priority Auto: Select the default exposure level in the Auto Exposure mode.
Manual: Set the default exposure level in the Manual Exposure mode.
<Auto Exposure>
<Manual Exposure>
NOTE: EXP. 1 (Lighter) to EXP. 9 (Darker)
Lighter Darker
Normal
Lighter Darker
Normal
Manual Expo.
Adjust
Determine the default voltage curve (EXP. level) in the Manual Exposure mode,
as optimized by the type of original.
<Manual Exposure Voltages in Different Modes>
NOTE: EXP. 5 uses as reference the voltage value automatically adjusted by
the F5 operation.
Mode 1
Mode 1 Halftone images, photos
Mode 2 Ordinary originals
Mode 3 Originals with a colored back-
ground or faint texts
EXP.
Manual Exposure Voltage (V)
Mode 2
Mode 3
123456789
+8
+8
+8
+5 +2 +1 0 –1 –2 –5 –8
+6 +4 +2 0 –2 –4 –6 –8
+7 +6 +3 0 –3 –6 –7 –8
Finishing Priority Select the default finishing type when the copier is equipped with a Sorter or Sta-
ple Sorter.
Non Sort Group
Sort Sort Staple
+
Hole Punch
NOTE: Hole Punch can be
combined with any one
of the functions.