Minolta EP5000 - Page 236

Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-12
1156SBS040405A
[5/6]
Touch Panel
Display
Setting (The default is .)
Highlighted
Custom 2in1 Make the settings for “Paper,” “Zoom,” “Margin,” and “Erase” that are automati-
cally recalled when 2
-
in-1 copy is selected.
Position: Right Edge, Left Edge, Frame, Top
Edge, Center, Frame+Center
Width: Metric areas – 5, 10, 15, 20 mm
Inch areas – 1/4, 1/2, 3/4, 1”
Auto Paper
Function Initial SettingDescription
Paper Auto Paper, sizes of paper loaded in drawers
Metric areas:
X0.707
Inch areas:
X0.647
Zoom Auto Size, fixed zoom ratios
Margin
No margin
Position: Right edge, left edge
Mode: Shift-for-Margin, Margin-by-Reduc-
tion
Width: Metric areas – 5, 10, 15, 20 mm
Inch areas – 1/4, 1/2, 3/4, 1”
Erase
No erase
Make the following selections only when
Frame+Center is selected.
Frame: Metric areas – 5, 10, 15, 20 mm
Inch areas – 1/4, 1/2, 3/4, 1”
Center: Metric areas – 5, 10, 15, 20 mm
Inch areas – 1/4, 1/2, 3/4, 1”
NOTE: The erase width for the Top Edge and for the CD direction of the
Frame is only 10mm for the metric areas and 1/2” for the inch areas.
Custom 2in1
Separation
Make the settings for “Paper,” “Zoom,” “Margin,” and “Erase” that are auto-
matically recalled when 2-in-1 separation copy is selected.
Position: Right Edge, Left Edge, Frame, Top
Edge, Center, Frame+Center
Width: Metric areas – 5, 10, 15, 20 mm
Inch areas – 1/4, 1/2, 3/4, 1”
Function Initial SettingDescription
Paper Auto Paper, sizes of paper loaded in drawers
Metric areas:
X1.414
Inch areas:
X1.294
Zoom Auto Size, fixed zoom ratios
Margin
No margin
Position: Right edge, left edge
Mode: Shift-for-Margin, Margin-by-Reduc-
tion
Width: Metric areas – 5, 10, 15, 20 mm
Inch areas – 1/4, 1/2, 3/4, 1”
Erase No erase
Make the following selections only when
Frame+Center is selected.
Frame: Metric areas – 5, 10, 15, 20 mm
Inch areas – 1/4, 1/2, 3/4, 1”
Center: Metric areas – 5, 10, 15, 20 mm
Inch areas – 1/4, 1/2, 3/4, 1”
NOTE: The erase width for the Top Edge and for the CD direction of the Frame
is only 10mm for the metric areas and 1/2” for the inch areas.
1st Drawer