3.9 Grid Lines
This setting allows you to add gridlines to the photo capture screen. The gridlines
may help with aligning and aiming your shot.
1.
To access this menu, press the MENU button.
2.
Once in the menu, press the UP and DOWN buttons to navigate. Pressing the LEFT
and RIGHT buttons will switch the menu from Photo settings to Video or System
settings.
3.
Select ‘Grid Lines’ and press the OK button to enter the submenu.
4.
You may select from On and Off.
5.
Highlight your selection and press the OK button to confirm.
6.
Press the MENU button to exit the settings menu and return to shooting.
3.10 Anti-Shake
This setting enables capture in high speed and low-light by electronically minimizing
motion blur and reducing camera shake.
1.
To access this menu, press the MENU button.
2.
Once in the menu, press the UP and DOWN buttons to navigate. Pressing the LEFT
and RIGHT buttons will switch the menu from Photo settings to Video or System
settings.
3.
Select ‘Anti-Shake’ and press the OK button to enter the submenu.
4.
You may select from On and Off.
5.
Highlight your selection and press the OK button to confirm.
6.
Press the MENU button to exit the settings menu and return to shooting.
3.11 Date Stamp
This setting allows you to imprint a date and/or time stamp onto your captured
photos. Once a file is recorded with the imprint, the imprint cannot be removed
1.
To access this menu, press the MENU button.
2.
Once in the menu, press the UP and DOWN buttons to navigate. Pressing the LEFT
and RIGHT buttons will switch the menu from Photo settings to Video or System
settings.
3.
Select ‘Date Stamp’ and press the OK button to enter the submenu.
4.
You may select from Off and On.
5.
Highlight your selection and press the OK button to confirm.
6.
Press the MENU button to exit the settings menu and return to shooting.
To Next Page
Loading...
