Open the flash door manually by pushing up
Mount
Remove placeholder plate and mount hot-shoe
accessories like an external microphone, video
light, flash unit or other
Speaker
Built-in speaker plays button press sounds and
other video playback sounds
Install a neck strap using these mounting hooks
Lamp to assist the camera’s system in attaining a
proper focus point
Microphone
Built-in Microphone to capture audio during a
video recording
Input
Input port for a dedicated wired shutter remote
controller
Input port for an external microphone (3.5mm)
Front objective lens for photo and video capture
Buttons
Zoom Buttons: T and W buttons for optical
zooming in and zooming out
Button to focus and capture a
photo
Output port for displaying video by HDMI
-
Interface port for charging battery, transferring
photos to a PC, or using your camera as a PC
Camera
Door
Access door for installing/removing the battery
and SD memory card
Socket for installing a tripod or other mount plate
(1/4
-20 UNC thread)
Monitor
IPS monitor than can be opened and swiveled