The cable connections to the camera and flash unit will be done over the unit
itself.
The smartphone app offers all of the standalone modes, plus three advanced
shutter release modes. They are: Press & Hold, Press & Lock, and Timed
Release. The three shutter release modes require continuous Bluetooth
connection between the Miops Smart and the smartphone. If the connection is
lost, they will not work. The basic modes require Bluetooth connection during
the setup phase only. Once the parameters are set and the operations starts,
you can end the Bluetooth connection. Miops Smart will continue working
without interruption.
The mobile dongle is enabled for all modes of the smartphone app. You can
use the mobile dongle for all modes after you have connected your
smartphone to your camera using the mobile dongle. In this case, there will be
no cable connection to the camera or flash unit from the Miops Smart.
To Next Page
Loading...
