h. Time Lapse Mode
The Time Lapse mode has also
the same parameters with the
standalone mode. They are the
interval, exposure and the limit.
To get detailed information about
the parameters and the usage of
the time lapse mode, please
refer to the Time Lapse Mode
section in Standalone Mode
Operation of Miops Smart
(Chapter 8.d).You can set all of
the parameters using the Time
Lapse mode screen of the app.
To switch from one parameter to
the next one, just touch the icon
at the top of the screen. You will
see a notch moving to that
parameter and the screen will
show the available parameter
setting menu.
To know how to use the mobile
dongle in the laser mode, please
refer to the Mobile Dongle
section of the user manual.
i. DIY (Do It Yourself) Mode
The DIY mode has also the same parameters with the standalone mode.
They are the threshold, delay and the mode. To get detailed information
about the parameters and the usage of the DIY mode, please refer to the
DIY Mode section in Standalone Mode Operation of Miops Smart (Chapter
8.g).You can set all of the parameters using the DIY mode screen of the
app. To switch from one parameter to the next one, just touch the icon at
the top of the screen. You will see a notch moving to that parameter and
the screen will show the available parameter setting menu. To know how to
To Next Page
Loading...
