The smartphone app has been designed as an interface to configure and
control your MIOPS Smart. It is available on iOS and Android platforms. You
will receive software updates over Apple AppStore and Google Play. The iOS
version must be 7.0 or higher. The Android version must be 4.3 or higher.
The communication between the smartphone and MIOPS Smart is done
over Bluetooth connection. Your smartphone has to be compatible with
Bluetooth 4.0. The interface of the application is very similar for most of the
functions. They have only a few minor differences in some of the modes.
The difference will not change the user experience.
a. Installing the Application
The app name is “MIOPS” on AppStore and Android Market. You can
download and install it from the repositories just like any free app. There is
no registration needed to use the application. If your smartphone version is
compatible, you can install it to your phone by following the regular app
You will see the MIOPS logo on the screen of your phone. You can start the
application by touching the MIOPS icon. Make sure that your phone is not in
Airplane mode. Otherwise, MIOPS Smart cannot communicate with your
phone. Bluetooth must set to “ON” in your smartphone as well.
Please note that, your smartphone must have Bluetooth 4.0 capability.
Otherwise MIOPS Smart will not be able to connect to it. Miops Smart
features a Bluetooth 4.0 module which offers lower energy consumption
and better range compared to the previous versions.
To Next Page
Loading...
