2. Specifications
In this section you can find the technical specifications of Miops Smart.
LCD Screen: 128 x 128 pixels
Battery: 3.7 Vdc, 1020 mAh, 3.8 Wh
Bluetooth: Bluetooth 4.0 (Low Power)
USB Interface: 5 Vdc
Weight: 176 gr (Batteries included)
3. Charging and Operation
Miops Smart can only be used with the provided rechargeable battery and USB
connection. The battery will be charged when you connect Miops Smart to a
USB power source. You can use your computer USB port for this purpose. You
can power Miops Smart directly from the USB port if the battery is not in the
device. Using Miops Smart with other type of battery and power source may
harm your device.
When you connect your Miops Smart to a USB power source, it will start to
charge the battery automatically. The power led will light up when the battery
is charging. When the battery is full, the Power LED will dim. You can see the
remaining battery percentage on the screen of Miops Smart in any mode.
To Next Page
Loading...
