6) Press the down scroll button one more time and then bring the lock
parameter to LOCK OFF.
7) You have just adjusted the parameters of the SOUND mode.
8) Press the Start button to start capturing sound events.
Notice: Miops Smart will store the settings whenever you change them. You
will not lose your settings, when you turn the device off.
Miops Smart will get into the sleep mode if you don’t press any key in 30
seconds. You can press any key to get it out of sleep mode and it will have no
other affect. After that, the buttons will start working normally. If the Miops
Smart gets into sleep mode while actively working in a mode, the operation
will not be interrupted. Only the screen will be turned off to save the battery.
In such a case, you can just press a key to get the device out of the sleep
mode.
To Next Page
Loading...
