8. DO NOT connect the outlet of the shower to any tap, control valve,
trigger handset or other device intended to restrict the water outlet
ow. Fit only the Kohler Mira showerhead as supplied with this
product, only Kohler Mira recommended accessories must be used.
9. DO NOT perform any unspecied modications, drill or cut holes
in the shower or ttings other than instructed by this guide. When
servicing only use genuine Kohler Mira replacement parts.
10. ALWAYS make sure that all electrical connections are tight and
that there are no leaks after installation.
11. DO NOT run the shower with the lter removed.
12. If the shower is dismantled during installation or servicing then, upon
completion, an inspection must be made to ensure all electrical
connections are tight and that there are no leaks.
To Next Page
Loading...
Need help?
General
