EasyManuals Logo

Mira Advance Installation Guide

Mira Advance
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
1306246-W2-A
Patents and Design Registration
Design Registration: 000738141: 0003, 0006, 0007, 0009
Patents: GB: 2269466, 2270370, 2298478, 2298479, 2298481,
2289323, 2359339.
Ireland: 80655, 83692.
6.0 mm
Tools Required
Installation Requirements
General
We recommend that the product be brought into the room where it is to be installed
and left to acclimatise to room temperature, this will reduce the possibility of
condensation on electronic components.
The shower works best when water supply conditions are stable and within the
specications, refer to section 'Specications'. If the supply conditions fall outside
the specications, the shower may go into a safe shut down condition.
DO NOT connect the outlet of the shower to any tap, on/off control valve, trigger
operated showerhead or any other showerhead other than those specied for use
with this shower. This could cause scalding or severe damage to the product and
will invalidate the guarantee. Only Kohler Mira recommended showerheads, shower
hoses and accessories must be used.
Hereby, Kohler Mira Ltd. declares that the radio equipment type Mira Advance
Flex Extra (J09N) is in compliance with Directive 2014/53/EU. The full text of
the EU declaration of conformity is available at the following internet address:
www.mirashowers.co.uk.
The Mira Advance Flex Extra (J09N) operates in the 2.4 GHz frequency band at a
maximum radio frequency power of +4 dBm.
Standards and Approvals
The Mira Advance complies with the requirements of the BEAB Care Mark Standard
and the relevant directives for CE marking. The BEAB Care mark is invalid if the
product is not installed and used in accordance with the manufacturer’s specications
and instructions.

Other manuals for Mira Advance

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mira Advance and is the answer not in the manual?

Mira Advance Specifications

General IconGeneral
Temperature ControlThermostatic
Warranty2 Years
Power Ratings9.8 kW
Water Connection15 mm
Outlet Connection1/2"
Water Pressure0.7 - 10 bar
Cable Entry PointsBottom entry
Safety FeaturesOverheat protection
ApprovalsWRAS

Related product manuals