Important Safety Information
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
1. Installation of the shower must be carried out in accordance with
these instructions by qualied, competent personnel. Read all
instructions before installing the shower.
2. Isolate the electrical and water supplies before commencing
installation. The electricity must be isolated at the consumer unit.
Mains connections are exposed when the shower cover is removed.
3. DO NOT install the shower in areas with high humidity and
temperature (i.e. steam rooms and saunas).
4. DO NOT install the shower where it may be exposed to freezing
conditions. Ensure that any pipework that could become frozen is
properly insulated.
5. DO NOT switch the shower on if water leaks from the shower unit.
Isolate the electrical supply to the shower immediately.
6. DO NOT switch the shower on if the case appears to be damaged
or incorrectly tted. Isolate the electrical supply to the shower
immediately.
7. DO NOT switch the shower on if there is a possibility that the water
in the shower unit or ttings is frozen.
For continued safe operation, follow all instructions,
warnings and cautions contained in this guide and on the
shower unit. Failure to follow the instructions provided
with the shower will invalidate the guarantee.
Guarantee
For domestic installations, Mira Showers guarantee the Mira Advance against
any defect in materials or workmanship for a period of two years from the date of
purchase (shower ttings for one year).
For non-domestic installations, Mira Showers guarantee the Mira Advance against any
defect in materials or workmanship for a period of one year from the date of purchase.
For Terms and Conditions refer to the back cover of this guide.
To Next Page
Loading...
Need help?
General
