Mircom Autodialer ADC Series User Manual

Programming The Autodialer ADC
12
Setting the Online and Door Timers
To set the online and door timers, you must be in programming mode. Refer to Entering
Programming Mode on page 2 for instructions
Door timer setup
On-line timer setup
Step 1: Select “Adjust Door-Open Timer”
1. Press to scroll down or to scroll up until
you find “Adjust Door-Open TImer”.
2. Press to select.
Step 2: Set door-open timer
Enter the desired door-open period. The factory default
is 10 seconds.
Step 3: Store and exit
1. Press to store and continue.
2. Press to exit. The display will return to the
programming menu.
Step 1: Select “Adjust On-Line Timer”
1. Press to scroll down or to scroll up until
you find “Adjust On-Line TImer”.
2. Press to select.
Step 2: Set on-line timer
1. Enter the desired on-line period. The factory default
is 60 seconds.
2. Press to store and continue. The display will
return to the programming menu.
Adjust Door-Open
Timer - Press #
3
Door-Open Timer
00 to 99 Sec. _ _
#=Store, *=Abort
00 to 99 Sec. X
X
Press *
To exit
Adjust On-Line
Timer - Press #
3
On-Line Timer
00 to 99 Sec. _ _
#=Store, *=Abort
00 to 99 Sec. X
X

Mircom Autodialer ADC Series Specifications

General

Brand	Mircom
Model	Autodialer ADC Series
Category	Intercom System
Language	English