Mircom Autodialer ADC Series User Manual

Autodialer ADC Series Telephone Access System User’s Guide
17
Glossary
ADC
(Autodialer)
When a visitor enters a resident’s code in the lobby unit, the Autodialer Controller
(ADC) dials the resident’s local telephone number so that the visitor can
communicate with the resident. This feature requires a dedicated phone line.
Dial Code A one- to four-digit code that a visitor enters into the lobby unit to call a resident. In
a non-scrolling directory, records are listed according to resident dial code.
DTMF “Dual Tone Modulated Frequency” is a technical term for “touch tone”.
Keyless Code This feature allows you to enter a four-digit dial code that will enable a resident to
open the main door without a key.
Keypad
Navigation
Instructions on how to use the keypad.
Non-Scrolling
Directory
A paper directory that lists the residents of the building.
Online Timer This feature controls the maximum length of time that a visitor can speak with a
resident from the lobby unit.
Programming
Mode
This mode consists of multiple features that allow you to customize your Telephone
Access System.

Mircom Autodialer ADC Series Specifications

General

Brand	Mircom
Model	Autodialer ADC Series
Category	Intercom System
Language	English