Programming The Autodialer ADC
8
Deleting Records
To delete a record, you must be in programming mode. Refer to Entering Programming Mode on
page 2 for instructions.
•To delete another record follow step 2 again.
•To exit, press to return to the programming menu.
Step 1: Select “To Edit Resident Codes”
1. Press to scroll down or to scroll up until
you find “To Edit Resident Codes”.
2. Press to select.
Step 2: Select and delete the record
1. Enter the dial code for the record you want to
delete. The display will now show that record.
Note: Scroll up or down to view other records.
2. Press to delete the record. The display briefly
shows the message “End of List” to indicate that the
record was successfully deleted before returning to
the records list.
To Edit Resident
Codes - Press #
3
Code To Review
X
X X X
Code Telephone
X
X X X X X X-X X X X
To Next Page
Loading...
Need help?
General
