Mircom TX3 Series - 1.2 Features and Enclosures

10 TX3 Telephone Access System Programming Manual Version 2.7
LT-979 Copyright 2018
Configuration
2.1 Keypad Navigation
Figure 1 shows how to use the keypad when in CONFIGURATION MODE.
Note that the keypad buttons can have different functions when creating resident
entries. Refer to 2.8.1 Adding a New Record and Table 1: List of Screens for
more information.
Figure 1. Keypad Navigation
2.1.1 Exiting Configuration Mode
You can exit the configuration mode at any time.
To exit configuration mode
1. To exit the configuration mode, press the info key to return to the
previous menu.
2.2 Beginning Configuration
To configure the Telephone Access panel, you must first enter the configuration
mode.
In configuration
mode
Press to move
left.
*
In configuration
mode
Press to scroll up
Press to scroll
down.
Press to cancel
the selection or exit
Press to enter
and confirm selection.
Press to move right for checking
and un-checking the check box
#