Mircom TX3 Series - Accessing the Operation Menu

Configuration
Version 2.7 TX3 Telephone Access System Programming Manual 11
LT-979 Copyright 2018
To enter configuration mode
1. Press .
The main menu appears with four choices.
To access the Operation menu see section 2.3.
To access the View Configuration Information menu see section 2.4.
To view the time and date see section 2.5.
2. Select Configuration, then press the telephone key . The passcode
message appears.
3. Enter your passcode, then press the telephone key.
or
If you have not set a personal passcode, press 3 3 3 3, then press the
telephone key. This number is the four-digit factory default. You are now
in configuration mode.
To continue with configuration see section 2.6.
2.3 Accessing the Operation Menu
The Operation Menu lets you view and delete logs.
Main Menu
1 Configuration
2 Operation
3 View Cfg Info
4 View time & dat
Enter the Passcode
[ _ _ _ _ _ _ _ _ _ ]