4 TX3 Telephone Access System Programming Manual Version 2.7
LT-979 Copyright 2018
1 Introduction
This manual provides you with detailed instructions on how to configure the TX3
Telephone Access System from the main entry panel keypad.
This manual must be read in its entirety before beginning the configuration.
Configuration must be performed by a qualified technician and must adhere to
the standards and special notices set by the local regulatory bodies.
Note: Mircom periodically updates panel firmware and Configurator
Software to add features and correct any minor inconsistencies.
For information about the latest firmware or software visit the
Mircom website at www.mircom.com.
For warranty and special notices information see the Warranty and Special
Notices chapter on page 52.
This manual explains
• The TX3 Telephone Access System
• How to configure the TX3 Telephone Access System
To Next Page
Loading...
