Mircom TX3 Series - Schedule Menu

42 TX3 Telephone Access System Programming Manual Version 2.7
LT-979 Copyright 2018
Configuration
2.9 Schedule Menu
The schedule menu lets you set up a timetable to establish when certain panel
functions are permitted to occur, such as when calls to residents are allowed,
when residents can grant access to a visitor or when the postal lock can be used.
These schedules are designated and listed by name, and are available for selection
wherever it is necessary to invoke access permission.
Each schedule consists of eight periods.
To configure a schedule
1. Press the arrow to scroll to “Schedules” in the main configuration menu
and press the enter (telephone) key. The “Schedules” selection appears.
2. You are able to add, edit or delete any schedule except “Always” and
“Never”.
To add a schedule
3. Select Add. The “Enter Label” selection appears.
4. Create a label, then add a start, end time and the days of the week the
schedule will be active.
5. Define each of the eight periods for the schedule. At the end of the schedule
configuration the “Schedule Added” message appears.
6. Press the telephone (enter) key to accept.
7. Press info key to return to previous menu.
Schedule Options
1 Add
2 Edit
3 Delete
Enter Label
Schedule Added