Mircom TX3 Series - Factory Default; Input;Output

Configuration
Version 2.7 TX3 Telephone Access System Programming Manual 45
LT-979 Copyright 2018
3. Use the up and down arrow keys to change the time and date.
4. Press the enter (telephone) key to save the changes.
2.12 Factory Default
The “Factory Default” selection lets you apply the factory default settings for the
telephone access system.
Note: Selecting the Factory Default does not delete any resident
information.
To set the Factory Default
1. Scroll the arrow to “Factory Dflt” in the main configuration menu and
press the enter (telephone) key. The Factory Default confirmation
selection appears.
2. Press the telephone (enter) key to accept or i to cancel.
2.13 Input/Output
The Inputs and Outputs selection lets you define specific devices connected to
each input and output.
To access Inputs and Outputs
1. Press the arrow key to scroll to “Input/Output” in the main configuration
menu. The “Input/Output” selection appears.
Reset to default? <Y>
Ipt/Opt Options
1 Inputs
2 Outputs