48 TX3 Telephone Access System Programming Manual Version 2.7
LT-979 Copyright 2018
Configuration
To make a correlation
2. Select Add. The “Event” selection appears.
3. Press the arrow key to scroll to a specific type of input and press the
telephone (enter) key. The Event Data selection appears.
4. Press the arrow key to scroll to a specific type of input event and press the
telephone (enter) key. The “Response Type” selection appears.
5. Press the arrow key to scroll to a specific type of output action (response)
and press the telephone (enter) key. The “Response Data” selection
appears.
Event Type
[ X ]Input Active
[ ] Call Started
[ ] Call Ended
[ ] Call Connected
[ ] Access Granted
[ ] Access Denied
[ ] System Normal
Event Data
1 GP Input 1
2 GP Input 2
Response Time
< >Turn Output ON
< x >Turn Output OFF
Response Data
< >GP Output 1
< x >GP Output 2
To Next Page
Loading...
