miRider One - Adjusting the Handlebar Stem Height

43
5.2. ADJUSTING THE HANDLEBAR STEM HEIGHT
1
3
5
7
9
11
1. Open the handlebar stem clamp.
2. Place the handlebar at the desired height within the range indicated on the side of the
stem.
6
WARNING
· Always adjust the height of the handlebar stem within the indicated range markings.
Placing the height of the handlebar stem above the minimum insertion marking may
lead to loss of control of your e-bike during cycling or failure of the e-bike.
· Do not try to unfold your e-bike with the handlebar set too high. Unfolding your e-bike
with the handlebar set too high may pull out the connecting cables and may lead to
loss of control of your e-bike during cycling or failure of the e-bike.