miRider One - Charging the Battery

56
7.3. CHARGING THE BATTERY
6
WARNING
· Only charge the battery with the provided charger. Ensure the voltage of the charger
matchesthevoltageofthebattery.Non-matchingvoltagesmaycauseareor
explosion hazard.
· Do not use the battery or charger if there is visible damage. A damaged battery or
charger may cause an electric shock hazard.
· Donotusethebatteryorchargeronhighlyammablesurfacesorinacombustible
environment.Theheatgeneratedduringchargingmaycausearehazard.
· Donotuseorstorethebatteryandchargernearheatsourcesandhighlyinammable
liquids. Using or storing the battery and charger near heat sources may cause an
explosion hazard.
NOTICE
· Alwayschargethebatterywithinatemperaturerangeof10°C-45°C.
· Always plug the charger into the battery's charging port before plugging the charger
into the power outlet. Always disconnect the charger from the power outlet before
removing the charger from the battery’s charging port.