miRider One - After Use; Folding Your E-bike

54
7. AFTER USE
7.1. FOLDING YOUR E-BIKE
1. Open the handlebar stem clamp.
2. Collapse the telescopic handlebar stem to the lowest height.
3. Close the handlebar stem clamp.
4. Pull the handlebar stem safety lock up and open the handlebar stem latch.
5. Fold the handlebar stem.
6. Open the seatpost clamp.
7. Collapse the seatpost to the lowest height.
8. Close the seatpost clamp.
9. Fold the pedals. Follow the instructions in chapter 5.1.Folding and unfolding the pedals.
10. Stand on the right side of your e-bike.
11. Press the frame safety lock.
12. Open the frame latch.
13. Fold your e-bike until the front half attaches to the wheel magnet.
NOTICE
Always lock the battery in the frame to prevent the battery from falling out.
14. Put the strap around your e-bike.