miRider One - Use; Switching Your E-bike On and Off

50
5.9. GETTING USED TO YOUR E-BIKE
Werecommendgivingyoure-bikeatestruninaplacewithlittleornotrac.Thisallows
youtobecomefamiliarwiththedierentassistancelevelsinacontrolledenvironment.
Start with the lowest assistance level and increase throughout the trip.
6
CAUTION
Always try out the brakes during the test cycle so you know how hard you must squeeze
and how powerful the brakes are. Disc brakes are more powerful than traditional brakes.
Always keep in mind which brake levers operate the front and the rear brakes.
6. USE
6.1. SWITCHING YOUR E-BIKE ON AND OFF
1. Press the power button to switch on the display.
2. Pressandholdfor2secondstoswitchothedisplay.
6.2. SETTING THE ASSISTANCE LEVEL
You can adjust the assistance level while stationary or while cycling. You can view the
assistancelevelontheLCDscreen.Therearevelevelsofassistance.
Press the up button to increase assistance level or press the down button to decrease
assistance level.
6.3. SWITCHING THE HEADLIGHTS ON AND OFF
Pressandholdtheupbuttonfor4secondstoswitchtheheadlightson/o.