miRider One - Maintenance; Service Plan

60
NOTICE
· Do not force the battery into the frame. Always ensure the battery is the correct way
around. Do not attempt to install the battery the wrong way around. Do not attempt to
remove the battery whilst locked into place.
· Always correctly and fully insert the battery into the frame. Inserting the battery
incorrectly or incompletely into the frame may damage the battery or the frame.
· Always lock the battery in the frame to prevent the battery from falling out.
· Alwaysfolddownthebatteryhandlesothehandleisushwiththebatterybefore
unfolding the frame to prevent damage to the battery handle.
8. MAINTENANCE
8.1. SERVICE PLAN
6
WARNING
As with all mechanical components, the e-bike is subjected to wear and high stresses.
Dierentmaterialsandcomponentsmayreacttowearorstressfatigueindierentways.
If the design life of a component has been exceeded, it may suddenly fail, possibly causing
injuries to the rider. Any form of crack, scratches or change of colouring in highly stressed
areas indicate that the life of the component has been reached and it should be replaced.
It is recommend to have your e-bike checked and serviced by a MiRiDER dealer at least
once annually or every six months if you use your e-bike daily. The check-ups and
adjustments prevent breakage and costly repairs. Choose a service to have your wheels
professionally trued and tensioned as part of the ongoing service level to prolong the life of
your e-bike.