miRider One - Using the Throttle

52
6.6. USING THE WALK ASSIST
You can use walk assist to aid in pushing your e-bike while walking.
1. Press the power button to switch on the display.
2. Push and hold the throttle with your thumb to enable the walk assist.
3. Release the throttle to disable the walk assist.
4 Ifthewalkassistisnotbeingused,switchoyoure-biketopreventaccidental
activation of the motor if a pedal is being pushed.
4 In event of an emergency, pull the brakes to disable the walk assist instantly.
6
CAUTION
Only use the walk assist mode while walking with your e-bike. Keep your legs clear from the
pedals.