MIT MIT-SCAN-T3

Instruction Manual MIT-SCAN-T3 Version 02/2021
Page 52
5.7 Synchronize and save data
From time to time, data sets on the USB flash drive and the measuring
device have to be synchronized. For this there are two options:
“Synchronization” button:
Press this button to synchronize data with the active file on USB flash
drive. In Fig. 46 a synchronization of data sets e.g. with device
“Prototype 003” is shown.
Menu Tools - “Synchronize USB flash drive”:
Select device whose data has to be synchronized with USB flash drive.
All data sets of the table can be stored on PC. The following file
formats are available:
MIT format:
In this format the data is encrypted before saving and can be loaded
into the software at any time via “Import”.
Excel format:
By pressing button “Export selected data sets” (s. Fig. 47), the data
sets are saved as XLSX file.
Fig. 46 Synchronize data
Please note:
The form sheet cannot be
reloaded later with the
program. It is therefore
recommended to save the
used data sets in MIT format
(*.mit).
Fig. 47 Data storage